1.3020多欧，损2970，盈3170 另外向大家求教：比如在5日线金叉10日线的情况下，如何在mt4上设置出绿箭头？ 看到好多朋友在贴的图上都有红绿买卖箭头，不知道怎么设置的，请不吝指教，谢谢了！！！

猎豹的那个均线帖子也找不到了？:')

路过,观望,学习

那是指标来的

MT4本身不就可以画箭头吗。 捕获.PNG

我刚刚在1。3032空了，你还得多做什么，看我赚一波下跌得情吧

空啊，还不到多的时候！

首席的方法是人工的，呵呵 我想自动标出的：如5日线上穿10，出个上箭头，反之死叉出个下箭头。

密切关注。。。:037:

这个也不难，会的话，自己写个脚本，不会上网搜一下。

不会写，也没搜到:(，首席给点指点吧！！！

那就找人写。淘宝就有帮人写这个的。 其实如果你只是要均线金叉发信号。自己学一下，也不难的。 MetaQuotes4语言，你不需要会，你拿MT4里面的自带的几个出来研究一下，就能了解一些编法。 extern double TakeProfit = 50; extern double Lots = 0.1; extern double TrailingStop = 30; extern double MACDOpenLevel=3; extern double MACDCloseLevel=2; extern double MATrendPeriod=26; //+------------------------------------------------------------------+ //| | //+------------------------------------------------------------------+ int start() { double MacdCurrent, MacdPrevious, SignalCurrent; double SignalPrevious, MaCurrent, MaPrevious; int cnt, ticket, total; // initial data checks // it is important to make sure that the expert works with a normal // chart and the user did not make any mistakes setting external // variables (Lots, StopLoss, TakeProfit, // TrailingStop) in our case, we check TakeProfit // on a chart of less than 100 bars if(Bars<100) { Print("bars less than 100"); return(0); } if(TakeProfit<10) { Print("TakeProfit less than 10"); return(0); // check TakeProfit } // to simplify the coding and speed up access // data are put into internal variables MacdCurrent=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_MAIN,0); MacdPrevious=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_MAIN,1); SignalCurrent=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_SIGNAL,0); SignalPrevious=iMACD(NULL,0,12,26,9,PRICE_CLOSE,MODE_SIGNAL,1); MaCurrent=iMA(NULL,0,MATrendPeriod,0,MODE_EMA,PRICE_CLOSE,0); MaPrevious=iMA(NULL,0,MATrendPeriod,0,MODE_EMA,PRICE_CLOSE,1); total=OrdersTotal(); if(total<1) { // no opened orders identified if(AccountFreeMargin()<(1000*Lots)) { Print("We have no money. Free Margin = ", AccountFreeMargin()); return(0); } // check for long position (BUY) possibility if(MacdCurrent<0 && MacdCurrent>SignalCurrent && MacdPrevious(MACDOpenLevel*Point) && MaCurrent>MaPrevious) { ticket=OrderSend(Symbol(),OP_BUY,Lots,Ask,3,0,Ask+TakeProfit*Point,"macd sample",16384,0,Green); if(ticket>0) { if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("BUY order opened : ",OrderOpenPrice()); } else Print("Error opening BUY order : ",GetLastError()); return(0); } // check for short position (SELL) possibility if(MacdCurrent>0 && MacdCurrentSignalPrevious && MacdCurrent>(MACDOpenLevel*Point) && MaCurrent0) { if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES)) Print("SELL order opened : ",OrderOpenPrice()); } else Print("Error opening SELL order : ",GetLastError()); return(0); } return(0); } // it is important to enter the market correctly, // but it is more important to exit it correctly... for(cnt=0;cnt0 && MacdCurrentSignalPrevious && MacdCurrent>(MACDCloseLevel*Point)) { OrderClose(OrderTicket(),OrderLots(),Bid,3,Violet); // close position return(0); // exit } // check for trailing stop if(TrailingStop>0) { if(Bid-OrderOpenPrice()>Point*TrailingStop) { if(OrderStopLoss()SignalCurrent && MacdPrevious(MACDCloseLevel*Point)) { OrderClose(OrderTicket(),OrderLots(),Ask,3,Violet); // close position return(0); // exit } // check for trailing stop if(TrailingStop>0) { if((OrderOpenPrice()-Ask)>(Point*TrailingStop)) { if((OrderStopLoss()>(Ask+Point*TrailingStop)) || (OrderStopLoss()==0)) { OrderModify(OrderTicket(),OrderOpenPrice(),Ask+Point*TrailingStop,OrderTakeProfit(),0,Red); return(0); } } } } } } return(0); } // the end.

看不懂，我先琢磨琢磨吧，谢谢首席了！！！